AA or AAA: Which Motorcycle Jacket Rating Do You Actually Need for Touring?
Gear
Published

AA, AAA, Level 1, Level 2 — the labels inside a motorcycle jacket decoded: what EN 17092 and EN 1621 actually test, the speeds behind each class, and how to choose for long-distance touring.
For most touring riders, an AA-rated jacket with Level 2 armour is the sensible floor, and AAA is worth having if you can live with the extra weight and heat. The letters come from EN 17092 (the European Norm for motorcycle riders' protective garments, published in 2020) and they are a pass/fail stamp, not a score: AAA means the fabric at the shoulders, elbows and hips survived an abrasion test at 120 km/h, AA means 70 km/h, A means 45 km/h. The armour inside is certified separately under EN 1621, where Level 2 lets roughly half as much force through as Level 1. Here is what each label actually tests, and how to read them when buying for a long trip.
Why there is a rating on your jacket at all
Since 21 April 2018, motorcycle clothing sold in the European Union has been regulated as personal protective equipment (PPE) under Regulation (EU) 2016/425. Anything sold as motorcycle clothing has to be certified against a published standard by a third-party notified body, carry the CE (Conformité Européenne) mark, and tell the buyer which standard and level it met. Great Britain uses its own UKCA (UK Conformity Assessed) mark, but the tests are the same. For jackets and trousers the standard is EN 17092: Part 1 sets the test methods, Parts 2 to 6 define the classes from AAA down to C.
What the five classes mean
The preview of EN 17092-2:2020, the AAA part, says Class AAA garments "offer protection from impact and abrasion, using materials and construction that meet higher requirements" than the lower classes, and adds a telling caveat: they "may have limiting ergonomic, weight and thermal penalties for some riding activities". That is the standard itself admitting AAA kit can be heavy and hot.
Cycle Gear's Common Tread summarises the rest of the ladder:
| Class | What it certifies |
|---|---|
| AAA | Highest abrasion and impact requirements; historically racing leathers, now also some heavy textile jackets and riding jeans |
| AA | Greater abrasion and impact protection than A; the class most touring textiles sit in |
| A | The minimum impact and abrasion protection for a garment with armour |
| B | Meets Class A abrasion resistance but has no impact protectors fitted |
| C | Holds armour in place only; does not meet the minimum abrasion requirement and is meant to be worn with another garment |
For Class B, the standard itself recommends wearing at least EN 1621-1 shoulder and elbow protectors underneath.
The speeds behind the letters
The abrasion test uses a machine developed at TU (Technische Universität) Darmstadt. Samples are mounted on a rotating arm, spun to a set speed and dropped onto an abrasive surface so they slide to a stop. The sample passes if no hole larger than 5 mm has opened. Each garment is divided into three risk zones, each with its own speed per class.
Dainese's explainer describes the zones: Zone 1 is the most exposed (shoulders, elbows, hips, knees), Zone 2 covers the arms, back, buttocks and outer legs, and Zone 3 the least exposed (chest, abdomen, inner arms, inside and back of the legs). One wrinkle noted by Bennetts BikeSocial: under AAA the seat of the trousers counts as Zone 1, while under A and AA it falls into the less demanding Zone 2.
The machine speeds are specified in revolutions per minute (rpm) and usually quoted as the equivalent sliding speed. Adventure Spec's technical article gives the rpm figures, and Dainese confirms the Zone 1 conversions:
| Class | Zone 1 | Zone 2 | Zone 3 |
|---|---|---|---|
| AAA | 707 rpm ≈ 120 km/h | 442 rpm ≈ 75 km/h | 265 rpm ≈ 45 km/h |
| AA | 412 rpm ≈ 70 km/h | 265 rpm ≈ 45 km/h | 147 rpm ≈ 25 km/h |
| A | 265 rpm ≈ 45 km/h | 147 rpm ≈ 25 km/h | no abrasion requirement |
Note the AA figure: it is 70 km/h, not the 75 km/h that circulates in many online summaries; 412 rpm on the Darmstadt machine corresponds to 70 km/h.
Two caveats. The speed is the sample's speed when it hits the surface, not a promise that the jacket protects at that road speed; a real slide involves body weight, road texture and tumbling the machine does not replicate. And it is pass/fail: a fabric that barely clears the hole criterion and one that lasts five times longer get the same letters. The standard also sets per-zone minimums for seam and tear strength, rising with class, but the exact newton values are hard to verify outside the standard text, so treat figures seen online with caution.
Why pass/fail matters: the MotoCAP findings
MotoCAP (the Motorcycle Clothing Assessment Program, run in Australia and New Zealand by transport authorities, insurers and rider groups) buys garments at retail and publishes star ratings from time-to-hole abrasion tests, impact tests and seam-burst tests. Its FAQ is blunt about the CE label: EN 17092 "only tells a buyer if the garment has passed a minimum level of protection", and testing "has identified 45 garments certified to EN 17092 that have received half or one star for protection in MotoCAP".
A September 2026 report on motorcycles.news, drawing on MotoCAP data, quotes the programme's chief scientist, Associate Professor Chris Hurren of Deakin University, saying manufacturers are "pulling protection out of gear to save money" while still meeting the standard, and cites one product whose abrasion time fell from 3.7 seconds to 1.2 seconds between versions at an unchanged price. The same report quotes independent PPE expert Paul Varnsverry's deliberately rough estimate that AAA, AA and A deliver roughly 60 %, 40 % and 20 % of achievable protection. Those percentages are a simplification, not a test result, but the direction is clear: the letters are a floor, and the floor is lower than most riders assume.
For a touring rider the lesson is that two AA jackets can differ a great deal; construction (multiple layers in Zone 1, leather or aramid panels at the joints) and a MotoCAP rating, where one exists, say more than the CE class.
The armour: EN 1621 Level 1 versus Level 2
The pads inside are certified separately under EN 1621. A striker hits the protector with 50 joules of energy and the force passing through to an anvil underneath is measured; lower is better. Figures confirmed by the test house SATRA and by Dainese:
| Protector | Standard | Level 1 | Level 2 |
|---|---|---|---|
| Shoulder, elbow, hip, knee | EN 1621-1 | mean ≤ 35 kN, no single strike over 50 kN | mean ≤ 20 kN |
| Back (full, central or lumbar) | EN 1621-2 | mean ≤ 18 kN, no single strike over 24 kN | mean ≤ 9 kN, no single strike over 12 kN |
(kN is kilonewtons, a unit of force; 1 kN is roughly the weight of 100 kg.) Level 2 limb armour passes a little over half the force of Level 1; Level 2 back armour passes half. Protectors may also be marked T+ or T- if they were additionally tested at +40 °C and -10 °C, which matters to anyone riding an Alpine autumn or a Spanish summer: foam can harden in cold and soften in heat, and the optional temperature tests are the only part of the certification that checks for it.
Many touring jackets ship with a back-protector pocket but no pad, or a thin Level 1 insert that stops short of the full spine. A full-length EN 1621-2 Level 2 back protector is arguably the single most worthwhile upgrade for a long trip.
How to read the label in the shop
According to the British Safety Industry Federation, the CE mark must appear on the garment and on each fitted protector, an instruction booklet must name the certifying body and the standard, and a Declaration of Conformity must be supplied or linked. The sewn-in label should show the standard and year (for example EN 17092-3:2020 for AA), the class, a motorcyclist pictogram and the notified body's four-digit number.
Two warning signs: a jacket sold as motorcycle clothing with no EN 17092 class on the label is either pre-2018 stock, non-compliant or fashion wear; and a label quoting EN 13595 is from the earlier standard, which BikeSocial's comparison table shows demanded considerably more abrasion resistance and which, per the motorcycles.news report, was withdrawn as a certification basis on 5 September 2022. Such a garment is older but not worse.
So which class for a long tour?
No European country requires a particular class for road riding. What some countries do require is specific items, so check before you travel: France makes gloves compulsory for rider and passenger, and service-public.gouv.fr states they "must carry the CE marking", with a fixed fine of €68 and one licence point for riding without them.
AA is the realistic minimum for touring. The 70 km/h Zone 1 test sits above urban speeds, the class includes almost every laminated and drop-liner touring jacket from the mainstream brands, and the weight and heat penalty over A is small. Fit Level 2 armour at the shoulders and elbows and add a Level 2 back protector.
AAA is worth it when the riding is fast and some comfort can be sacrificed. AAA textile and even mesh jackets now exist: a June 2023 Lobotourisme inventory listed 43 AAA summer jackets from 15 brands, starting under €200. For a trip built on motorway days and mountain passes, AAA at the shoulders and hips is a sound investment, provided the jacket still fits over base layers and still vents. A jacket unzipped because it is too hot protects nobody.
A is for the commute, not the Camino. With no Zone 3 abrasion requirement and a 45 km/h Zone 1 test, Class A is adequate for town riding at town speeds. On a multi-day tour with luggage, long straights and fatigue, it is the wrong class.
The route matters too. A day with long stretches at 120 km/h is exactly the speed the AAA Zone 1 test simulates; the Travel Riders route planner lets riders choose twisty, slower back roads over the motorway when the kit, or the heat, argues for it.
Before you buy
Find the EN 17092 label and check the class, year and notified body number. Pull every protector out and read its own label for EN 1621-1 or 1621-2 and the level. Ask whether a back protector is included or merely a pocket. If the model has a MotoCAP rating, look it up: a four-star AA jacket is a better buy than an unknown AAA one. Then ride in it for an hour before committing, because the best-rated jacket only works when it is zipped up.
Planning the ride to go with the new kit? Draw the route, split it by days and export the GPX file from the Travel Riders route planner, and make sure the only sliding you do is a sideways glance at the view.
